Topic 3
Young's modulus: stiffness of a material
In the straight part of the curve, stress divided by strain is a constant. For stretching, that constant is Young's modulus, Y. A bigger Y means a stiffer material: it takes more stress to produce the same strain.
Y = stress / strain = (F / A) / (ΔL / L) = F L / (A ΔL)
unit Pa; for steel Y is about 2 × 10¹¹ Pa
Hang a load on a 2 m wire, 1 mm² across
- Y of steel
- 2 × 10¹¹ Pa
- stress = F / A
- 1 × 10⁸ Pa
- strain = stress / Y
- 5 × 10⁻⁴
- extension = strain × L
- 1 mm
Same load, same wire size: the material with the smaller Y stretches more. Steel under 100 N stretches 1 mm. The stretch is drawn much larger than to scale.
Predict first
Wire Q is made of the same metal as wire P, but is twice as long and has twice the diameter. Both carry the same load. How does Q's extension compare with P's?
ΔL = F L / (A Y)
with Y fixed by the material, ΔL grows with L and falls with A, so with the square of the diameter
Y belongs to the material
Y does not change with the length or thickness of a sample, only with what it is made of. Steel has a larger Young's modulus than rubber, so physics calls steel the more elastic of the two, even though rubber stretches more easily.