Topic 2
Reading the stress–strain curve
Pull a metal wire harder and harder and plot stress against strain. For small loads the wire behaves like a spring: double the stress, double the strain, and it springs back when you let go. That proportional rule is Hooke's law. It does not last forever.
Predict first
A copper wire is loaded until it goes past its yield point, and then the load is removed. What happens to its length?
O to A is a straight line: stress is proportional to strain, so Hooke's law holds. A is the proportional limit.
Text version
- O to A is a straight line: stress is proportional to strain, so Hooke's law holds. A is the proportional limit.
- From A to B the line bends, but the wire still returns to its original length if unloaded. B is the yield point, or elastic limit.
- Past B the strain grows fast for little extra stress. Unload here and the wire comes back along the dashed line, parallel to OA, keeping a permanent stretch.
- D is the highest stress the wire can bear, its ultimate tensile strength. After D the wire thins at one spot and breaks at E, the fracture point.
The points to know: the proportional limit, where the straight line ends; the yield point, also called the elastic limit, beyond which some stretch is permanent; the ultimate tensile strength, the highest stress on the curve; and the fracture point, where the wire breaks.
A ductile metal such as copper or aluminium has a long stretch between the yield point and fracture, which is why it can be drawn into wire. A brittle material such as glass breaks soon after its elastic limit.