Topic 2

The diode: a one-way valve

Join p-type and n-type silicon and you get a p-n junction diode. Near the join, electrons and holes cancel each other out, leaving a thin depletion layer with no free carriers. An electric field across that layer acts as a barrier.

Connect the p side to the positive terminal and the barrier shrinks: forward bias. Connect it the other way and the barrier grows: reverse bias.

Predict first

A 5.7 V battery, a 1 kΩ resistor and a silicon diode are in series, with the diode forward biased. Taking the drop across the diode as 0.7 V, what current flows?

Change the voltage across the diode

010203040-1-0.500.7voltage (V)current (mA)
voltage
0.6 V
bias
forward
current
105.2 µA

Forward bias below the knee: the barrier is not yet overcome, so the current is still very small.

Going from 0.65 V to 0.75 V multiplies the current by about 47. That is why the drop stays close to 0.7 V.

In forward bias almost nothing flows until the voltage reaches the knee, about 0.7 V for silicon. Beyond it the current rises steeply while the voltage hardly changes, so in circuit questions treat a conducting silicon diode as a fixed 0.7 V drop.

I = (E − 0.7 V) / R

forward-biased silicon diode in series with a resistor R and a battery of emf E

In reverse bias only a tiny current flows, in microamperes or less, until a large reverse voltage causes breakdown. For an ideal diode, NEET treats this as zero current.