Topic 1

Doping: n-type and p-type

Before you start

Silicon has 4 outer (valence) electrons. In a crystal each silicon atom shares one electron with each of its 4 neighbours, making 4 covalent bonds.

Pure silicon is an intrinsic semiconductor. Its band gap, the energy an electron needs to break free of a bond, is about 1.1 eV. That is small enough for heat to free a few electrons at room temperature. Each freed electron leaves behind a gap in the bond called a hole, which behaves like a positive charge that can move.

So in pure silicon the number of free electrons always equals the number of holes. Adding a tiny amount of another element, called doping, breaks that balance on purpose.

Predict first

A silicon crystal is doped with a little boron, which has 3 valence electrons. What does it become?

What does the added atom do?

SiSiSiSiSiSiSiSiSifree electronhole
type
intrinsic
majority carriers
none: electrons = holes
minority carriers
none

Heat breaks a few bonds. Each break frees one electron and leaves one hole, so the two numbers stay equal.

Add a 5-valence element such as phosphorus or arsenic and each atom gives one spare electron: an n-type semiconductor, with electrons as majority carriers. Add a 3-valence element such as boron or aluminium and each atom creates a hole: a p-type semiconductor, with holes as majority carriers. Either way the crystal stays neutral.

nₑ × nₕ = nᵢ²

nₑ, nₕ: electron and hole densities; nᵢ: the density in pure silicon at the same temperature

For silicon nᵢ is about 1.5 × 10¹⁶ per m³. Dope it to nₑ = 1 × 10²² per m³ and the holes drop to (1.5 × 10¹⁶)² / 10²² = 2.25 × 10¹⁰ per m³. More of one carrier means fewer of the other.