Topic 4
Resonance and the power an AC circuit uses
XL rises with frequency and XC falls. At one frequency they are equal and cancel exactly, so the impedance drops to R alone and the current is as large as it can be. This is resonance.
ω₀ = 1 / √(LC) f₀ = 1 / (2π √(LC))
resonant angular frequency and resonant frequency
With L = 1/π H and C = 100/π μF, √(LC) = 1 / (100π) s, so f₀ = 100π / 2π = 50 Hz.
Predict first
A series LCR circuit with R = 50 Ω is driven at its resonant frequency by a 200 V rms supply. What average power does it use?
Only the resistor turns electrical energy into heat. The average power is Vrms Irms cos φ, where cos φ is the power factor. For a series circuit it equals R / Z.
P = Vrms Irms cos φ cos φ = R / Z
average power and power factor
Tune the supply frequency
- f
- 30 Hz
- XL
- 60 Ω
- XC
- 166.7 Ω
- Z
- 117.8 Ω
- Irms = V / Z
- 1.7 A
- cos φ = R / Z
- 0.42
- P = Irms² R
- 144 W
R = 50 Ω on a 200 V rms supply. Below resonance XC is larger: the circuit acts like a capacitor and the current leads.
Wattless current
In a pure inductor or a pure capacitor φ = 90°, so cos φ = 0 and the average power is zero even though a current flows. At resonance φ = 0 and cos φ = 1, the largest it can be.