Topic 2

Inductors and capacitors resist AC differently

A resistor obeys V = I R at every instant, so its current and voltage rise and fall together. They are in phase.

An inductor (a coil, with inductance L) pushes back against any change in current. A capacitor (capacitance C) charges and discharges every cycle. Both limit an AC current. That limiting effect is called reactance, and like resistance it is measured in ohms.

Predict first

A capacitor has a reactance of 200 Ω on a 50 Hz supply. What is its reactance on a 100 Hz supply?

Faster changes make an inductor push back harder, so its reactance grows with frequency. A capacitor passes current more easily when it charges and discharges faster, so its reactance shrinks with frequency. On steady DC (f = 0) a capacitor blocks current completely, and an ideal inductor is just a wire.

XL = ωL = 2πfL XC = 1 / ωC = 1 / (2πfC)

inductive and capacitive reactance; f is the supply frequency in hertz

They also shift the timing. In an inductor the current lags the voltage by a quarter of a cycle (90°). In a capacitor the current leads the voltage by 90°.

Pick a part, then change the frequency

dashed: voltage vsolid: current i
frequency
50 Hz
XL = 2πfL
100 Ω
current on 100 V rms
1 A
current vs voltage
lags 90°

R = 100 Ω, L = 1/π H and C = 100/π μF all give 100 Ω at 50 Hz. Change the frequency: the resistor stays put, the inductor's reactance rises and the capacitor's falls.

A way to remember

Think of the word CIVIL. In a capacitor (C), I comes before V. In an inductor (L), V comes before I.