Topic 4

A rod moving through a field

A metal rod moving across a field is a source of emf in its own right. The charges inside move with the rod, so each feels a magnetic force along it, and charge collects at the ends.

Predict first

A rod 50 cm long moves at 10 m/s at right angles to a 0.4 T field, with the rod at right angles to both. What emf appears between its ends?

ε = B l v

l is the length of the rod, v its speed; rod, motion and field all at right angles

Why a moving rod drives a currentStep 1 / 5
2 ΩvB = 0.5 T · l = 0.2 m · v = 10 m/s

A metal rod 0.2 m long slides to the right at 10 m/s along two rails. The field is 0.5 T, into the page.

Text version
  1. A metal rod 0.2 m long slides to the right at 10 m/s along two rails. The field is 0.5 T, into the page.
  2. The charges in the rod move with it, so each one feels a magnetic force q v B along the rod. Positive charge is pushed to the top end.
  3. Charge piles up until the rod acts like a cell. Its emf is B l v = 0.5 × 0.2 × 10 = 1 V.
  4. The rails and the 2 Ω resistor close the circuit. A current I = 1 / 2 = 0.5 A flows anticlockwise: up the rod and down through the resistor.
  5. The current in the rod sits in the field, so it feels a force B I l = 0.5 × 0.5 × 0.2 = 0.05 N backwards. As Lenz's law says, it opposes the motion.

Connect the rod to a resistance R and a current I = B l v / R flows. That current, sitting in the field, feels a force B I l that drags against the motion. To keep the rod moving you must keep pushing, and the work you do appears as heat in the resistor.

Same result, two ways

The rod sweeps out area l v every second, so the flux through the circuit grows at B l v each second. Faraday's law then gives the same emf, ε = B l v.