Topic 1

Magnetic flux counts the field through a coil

Before you start

You need to know what a magnetic field B is (measured in tesla, T), the cosine of an angle, and that an emf is the push that drives a current round a circuit, measured in volts.

Picture field lines passing through a flat coil. Magnetic flux Φ measures how much field goes through it. It depends on the field, the area A of the coil, and how squarely the coil faces the field.

The angle that matters is between the field and the normal to the coil, the line standing straight out of its face. Not the angle between the field and the coil itself.

Predict first

A flat coil of area 0.05 m² sits in a uniform 0.4 T field. The plane of the coil makes 30° with the field lines. What is the flux through it?

Φ = B A cos θ

θ is the angle between B and the normal to the coil; flux is measured in weber (Wb), 1 Wb = 1 T m²

Turn the coil in the field

field B, 0.4 T →nA cos θ
angle θ
0°
cos θ
1
Φ = B A cos θ
20 mWb

Coil of area 0.05 m² seen edge-on, in a 0.4 T field; the red arrow n is its normal. 10 of the 10 lines drawn pass through it. The bar on the right is the area the field meets head-on, A cos θ.

Most and least

Flux is largest, B A, when the coil faces the field squarely (θ = 0°). It is zero when the field runs along the coil's face (θ = 90°).