Topic 3

Concentration and the Nernst equation

E° holds only when every ion is at 1 M. Change the concentrations and the voltage shifts. The Nernst equation gives the voltage at 298 K. Q is the reaction quotient: the product ion concentrations over the reactant ion concentrations. Solids such as Zn and Cu are left out.

Ecell = E°cell − (0.059 / n) log Q

at 298 K. For the Daniell cell, Q = [Zn²⁺] / [Cu²⁺] and n = 2

Predict first

A Daniell cell (E° = 1.10 V) has [Zn²⁺] = 1 M and [Cu²⁺] = 0.01 M at 298 K. What is its voltage?

Change the ion concentrations

1.001.051.101.151.20−3−2−10123log Q, Q = [Zn²⁺] / [Cu²⁺]Ecell (V)E° = 1.10 V at Q = 1
Q
100
log Q
2
E = 1.10 − (0.059 / 2) log Q
1.041 V

Each step of the sliders is a tenfold change. It moves the voltage by just 0.0295 V.

Less Cu²⁺ (the reactant) or more Zn²⁺ (the product) lowers the voltage, just as Le Chatelier would predict. For n = 2, each tenfold change in Q moves E by only 0.0295 V.

When the cell runs down

As the cell works, Q rises until E reaches 0. Then the reaction is at equilibrium and Q equals K, so E°cell = (0.059 / n) log K. For the Daniell cell, log K = 2 × 1.10 / 0.059 = 37.3, which makes K about 2 × 10³⁷.