Topic 4
Kirchhoff's rules and the Wheatstone bridge
Two rules solve any circuit. Junction rule: the current flowing into a junction equals the current flowing out, because charge is not lost. Loop rule: around any closed loop the voltage rises and drops add up to zero, because energy is conserved.
A Wheatstone bridge is four resistors in a diamond, with a cell across one diagonal and a galvanometer G across the other. Here P and Q are in one arm, and R and S in the other. When no current flows through G, the bridge is balanced.
Predict first
In a Wheatstone bridge P = 2 Ω, Q = 4 Ω and R = 3 Ω. What must S be for the galvanometer to read zero?
Adjust S until the galvanometer reads zero
- S
- 20 Ω
- potential at B
- 3.85 V
- potential at D
- 3.62 V
- galvanometer
- 22.6 mA
A 6 V cell, galvanometer resistance 10 Ω. The arrow on G shows which way current flows. At S = 30 Ω, P / Q = R / S and B and D sit at the same potential.
P / Q = R / S
balance condition: no current through the galvanometer
At balance the two middle points of the diamond are at the same potential, so nothing pushes current through G. The balance does not depend on the cell's emf or on the galvanometer's resistance. The metre bridge uses exactly this idea with a uniform wire.