Topic 3
What sets a capacitor's capacitance
A capacitor is two conductors that hold equal and opposite charges, +Q and −Q. The charge is proportional to the potential difference V between them. The constant is the capacitance C, measured in farads, F. One farad is huge, so μF and pF are common.
Q = C V
charge on a capacitor at potential difference V
For two parallel plates of area A, a gap d apart, the capacitance grows with the area and falls with the gap. Filling the gap with a dielectric of dielectric constant K multiplies it by K.
C = ε₀ A / d with a dielectric: C = K ε₀ A / d
ε₀ = 8.85 × 10⁻¹² F/m
Predict first
A parallel-plate capacitor has C = 6 μF in air. Its plate gap is halved and the gap is then filled with a dielectric of K = 3. What is its new capacitance?
Change the gap and the material between the plates
- gap d
- 2 mm
- C = K ε₀ A / d
- 44.25 pF
- compared with air at 1 mm
- × 0.5
Plate area A = 100 cm² = 0.01 m². Double the gap and C halves; a dielectric multiplies C by K.
Battery on or off
If the battery stays connected while you change the capacitor, V stays fixed and Q changes. If the capacitor is charged and then disconnected, Q stays fixed and V changes. Decide which one holds before you calculate.