Topic 3
Stopping potential and the graphs
In the laboratory the electrons are collected on a plate, the anode, and they make a current. Make the anode negative and it pushes electrons back. The smallest negative voltage that stops even the fastest electrons is the stopping potential V₀.
An electron of charge e crossing a voltage V₀ loses energy e V₀. So the stopping potential measures Kₘₐₓ directly: in electronvolts, the two numbers are the same.
e V₀ = Kₘₐₓ = h ν − φ₀
Predict first
Light of wavelength 248 nm falls on a metal with work function 2 eV. What is the stopping potential?
Curve A: weak light of 3 eV photons on a metal of work function 2 eV. The current stops when the anode is 1 V negative, so the stopping potential is 1 V.
Text version
- Curve A: weak light of 3 eV photons on a metal of work function 2 eV. The current stops when the anode is 1 V negative, so the stopping potential is 1 V.
- Curve B: the same colour, twice as bright. Twice as many electrons, so twice the saturation current. The stopping potential is still 1 V.
- Curve C: weak light again, but 4 eV photons. Each electron leaves with up to 2 eV, so it takes 2 V to stop them. At the same intensity the saturation current matches A.
The graph shows the two rules NEET tests most. Brightness changes the current, not the stopping potential. Frequency changes the stopping potential, not the current at a fixed intensity.
The V₀ against ν graph
Plot stopping potential against frequency and you get a straight line, V₀ = (h / e) ν − φ₀ / e. Its slope is h / e for every metal, so lines for different metals are parallel. Where a line meets the frequency axis is that metal's threshold frequency.