Topic 3

One slit spreads light out

Light through a single narrow slit does not make a sharp image of the slit. It spreads into a wide bright band in the middle with fainter bands on either side. This spreading is diffraction.

Think of the slit, of width a, as two halves. In the direction where the far edge is one whole wavelength farther than the near edge, each point in one half cancels a partner in the other half. That direction gives the first dark band.

Predict first

Light of wavelength 600 nm passes through a slit 0.4 mm wide. The screen is 2 m away. How wide is the central bright band?

first dark band: a sin θ = λ central band width = 2 λ D / a

a slit width, θ angle from the centre line, D slit-to-screen distance

Make the slit narrower or wider

central band 6 mm−15−10−5051015position on screen (mm)
first dark band at λ D / a
3 mm
central band = 2 λ D / a
6 mm

Light of 600 nm, screen 1 m away. Halve the slit width and the central band doubles.

The surprise is the direction of the effect: a narrower slit spreads light more. The central band is also twice as wide as each of the side bands, and much brighter.