Topic 4

Heat engines and the Carnot limit

A heat engine takes heat Q₁ from a hot source, turns part of it into work W, and gives the rest Q₂ to a cold sink. Its efficiency η is the fraction of the heat taken in that becomes work.

η = W / Q₁ = 1 − Q₂ / Q₁

W = Q₁ − Q₂ over one full cycle

Set the two temperatures

hot source T₁ = 800 K gives Q₁ = 1000 JW = 500 JQ₂ = 500 Jcold sink T₂ = 400 K
η = 1 − T₂ / T₁
50%
work per 1000 J
500 J
heat rejected
500 J

A hotter source or a colder sink raises the efficiency. Only a sink at 0 K would make it 100%.

Predict first

A Carnot engine works between a hot source at 527 °C and a cold sink at 127 °C. What is its efficiency?

The best possible engine between two temperatures is the Carnot engine. Its efficiency depends only on the two temperatures, and they must be in kelvin.

η = 1 − T₂ / T₁

T₁: hot source, T₂: cold sink, both in kelvin

Why 100% is out of reach

η could reach 1 only with a cold sink at 0 K. Every real engine must reject some heat to a colder body. This is the **second law of thermodynamics**: no engine can turn heat completely into work.