Topic 3

Moment of inertia: mass and how far out it is

Mass resists a change in straight-line motion. For turning, the resistance is the moment of inertia, I. It depends on the mass and, more strongly, on how far that mass sits from the axis.

Predict first

A thin ring and a flat disc have the same mass and the same radius. Which has the larger moment of inertia about the axis through its centre, at right angles to its face?

Each small piece of mass m at distance r from the axis adds m r². Because r is squared, mass far out counts for much more than mass near the axis.

I = Σ m r²

add m r² over every piece of the body; unit kg m²

Same mass, same radius, different shape

Thin ringHollow sphereFlat discSolid spherebar length: I compared with the ring

Thin ring, M = 2 kg, R = 0.5 m

I = M R² = 0.5 kg m²

Every bit of mass is at the full radius, so nothing is wasted near the axis. Axis through the centre, at right angles to the ring.

Moving the axis

The parallel axis theorem gives I about any axis parallel to one through the centre of mass: I = I(cm) + M d², where d is the gap between the two axes. A rod of length L has I = M L² / 12 about its middle, so about one end it has M L² / 12 + M (L / 2)² = M L² / 3.